2 Hour Fire Rated Metal Double Door Picture Frame Riser Door Panel
Product Reference: APD-WD-RF-120-MD-PF-3WL-2D
Our range of Fire Rated Access Panels are simple to install and suitable for walls where regular maintenance to services is required.
signage available upon request – contact sales for further details.
APD.WD.RF.120.MD.PF.3WL.2D Riser Door Panel is designed to fit into a structural membrane of a joint-less plasterboard wall system. It is manufactured with a 25mm wide picture frame. The panel has a Metal faced door. The panels door leaf is locked in place via a 3 Point Locking system as standard other lock options are available upon request. The Panel is Powder Coated RAL 9010 30% Gloss. Other colours available upon request. Other colours available upon request.
The APD-WD-RF-120-MD-PF-3WL-2D is manufactured from Zintec Steel with a 1.2mm thick Door and a 1.5mm Frame. Fast Fit Hinge System whichsaves time on fitting compared to a Full Piano Hinge system.
Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the appropriate fixing holes within the fold up fixing tabs ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply Intumescent acrylic mastic on both faces of the frame, nominally 5mm wide seal.